Applies ToWindows 10 Enterprise Multi-Session, version 20H2 Windows 10 Enterprise and Education, version 20H2 Windows 10 IoT Enterprise, version 20H2 Windows 10 on Surface Hub Windows 10, version 21H1, all editions Windows 10, version 21H2, all editions

Release Date:

25/10/2022

Version:

OS Builds 19042.2193, 19043.2193, and 19044.2193

10/11/22 IMPORTANT All editions of Windows 10, version 21H1 will reach end of service on December 13, 2022. After December 13, 2022, these devices will not receive monthly security and quality updates. These updates contain protections from the latest security threats. To continue receiving security and quality updates, we recommend that you update to the latest version of Windows.

8/26/22 REMINDER Windows Server, version 20H2 reached end of service on August 9, 2022. These devices no longer receive monthly security and quality updates that contain protection from the latest security threats. To continue receiving security and quality updates, Microsoft recommends updating to the latest version of Windows Server.

We will continue to service the following editions: Windows 10 Enterprise and Education, Windows 10 IoT Enterprise, Windows 10 Enterprise multi-session, and Windows 10 on Surface Hub. 

5/10/22 REMINDER To update to one of the newer versions of Windows 10, we recommend that you use the appropriate Enablement Package KB (EKB). Using the EKB makes updating faster and easier and requires a single restart. To find the EKB for a specific OS, go to the Improvements section and click or tap the OS name to expand the collapsible section. 

11/17/20

For information about Windows update terminology, see the article about the types of Windows updates and the monthly quality update types. For an overview of Windows 10, version 20H2, see its update history page. 

Note Follow @WindowsUpdate to find out when new content is published to the Windows release health dashboard.

 Highlights

  • It addresses an issue that causes an OS upgrade to stop responding, and then it fails. 

  • It addresses an issue that affects the font of three Chinese characters. When you format these characters as bold, the width size is wrong. 

  • It addresses an issue that affects Microsoft Direct3D 9 games. The graphics hardware stops working if the hardware does not have a native Direct3D 9 driver.

  • It addresses graphical issues in games that use Microsoft D3D9 on some platforms.

  • It addresses an issue that affects Microsoft Edge when it is in IE Mode. The titles of pop-up windows and tabs are wrong.

  • It addresses an issue that affects the lasso tool in a graphics editing program.

  • It stops the start of daylight saving time in Jordan at the end of October 2022. The Jordan time zone will permanently shift to the UTC + 3 time zone.

Improvements

Note: To view the list of addressed issues, click or tap the OS name to expand the collapsible section.

Important: Use EKB KB5003791 to update to Windows 10, version 21H2.

This non-security update includes quality improvements. Key changes include:

  • This build includes all the improvements from the supported Windows 10, version 20H2 editions.

  • No additional issues were documented for this release. 

Important: Use EKB KB5000736 to update to Windows 10, version 21H1.

This non-security update includes quality improvements. Key changes include:

  • This build includes all the improvements from the supported Windows 10, version 20H2 editions.

  • No additional issues were documented for this release. 

Important: Use EKB KB4562830 to update to the supported editions of Windows 10, version 20H2.

This non-security update includes quality improvements. When you install this KB:

  • It addresses an issue that affects Distributed Component Object Model (DCOM) authentication hardening. It automatically raises the authentication level for all non-anonymous activation requests from DCOM clients to RPC_C_AUTHN_LEVEL_PKT_INTEGRITY. This occurs if the authentication level is below Packet Integrity.

  • It addresses a DCOM issue that affects the Remote Procedure Call Service (rpcss.exe). It raises the authentication level to RPC_C_AUTHN_LEVEL_PKT_INTEGRITY instead of RPC_C_AUTHN_LEVEL_CONNECT if RPC_C_AUTHN_LEVEL_NONE is specified.

  • It addresses an issue that causes an OS upgrade to stop responding, and then it fails.

  • It addresses an issue that affects the Microsoft Azure Active Directory (AAD) Application Proxy connector. It cannot retrieve a Kerberos ticket on behalf of the user. The error message is, “The handle specified is invalid (0x80090301).”

  • It addresses an issue that affects the font of three Chinese characters. When you format these characters as bold, the width size is wrong.

  • It addresses an issue that affects Microsoft Direct3D 9 games. The graphics hardware stops working if the hardware does not have a native Direct3D 9 driver.

  • It addresses graphical issues in games that use Microsoft D3D9 on some platforms.

  • It addresses an issue that affects Microsoft Edge when it is in IE Mode. The titles of pop-up windows and tabs are wrong.

  • It addresses an issue that affects Microsoft Edge IE mode. It stops you from opening webpages. This occurs when you enable Windows Defender Application Guard (WDAG) and you do not configure Network Isolation policies.

  • It addresses an issue that might cause an application to stop responding. This might occur when the input queue overflows.

  • It addresses an issue that affects input method editors (IME) from Microsoft and third parties. They stop working when you close the IME window. This occurs if the IME uses Windows Text Services Framework (TSF) 1.0.

  • It addresses an issue that affects the lasso tool in a graphics editing program.

  • It addresses an issue that affects Miracast advertisements. This issue occurs on Surface Hub devices under certain conditions.

  • It addresses an issue that affects some drivers. They use more power when you play hardware-protected digital rights management (DRM) content.

  • It addresses an issue that affects .msi files. Windows Defender Application Control (WDAC) will ignore them when you disable script enforcement.

  • It addresses an issue that affects a remote desktop virtual desktop infrastructure (VDI) scenario. The session might use the wrong time zone.

  • It updates the Windows kernel vulnerable driver blocklist that is in the DriverSiPolicy.p7b file. This update also ensures that the blocklist is the same across Windows 10 and Windows 11. For more information, see KB5020779.

  • It makes Microsoft compliant with US Government (USG) version 6 revision 1 (USGv6-r1).

  • It stops the start of daylight saving time in Jordan at the end of October 2022. The Jordan time zone will permanently shift to the UTC + 3 time zone.

If you installed earlier updates, only the new updates contained in this package will be downloaded and installed on your device.

Windows 10 servicing stack update - 19042.2180, 19043.2180, and 19044.2180

This update makes quality improvements to the servicing stack, which is the component that installs Windows updates. Servicing stack updates (SSU) ensure that you have a robust and reliable servicing stack so that your devices can receive and install Microsoft updates.

Known issues in this update

Symptoms

Workaround

Devices with Windows installations created from custom offline media or custom ISO image might have Microsoft Edge Legacy removed by this update, but not automatically replaced by the new Microsoft Edge. This issue is only encountered when custom offline media or ISO images are created by slipstreaming this update into the image without having first installed the standalone servicing stack update (SSU) released March 29, 2021 or later.

Note Devices that connect directly to Windows Update to receive updates are not affected. This includes devices using Windows Update for Business. Any device connecting to Windows Update should always receive the latest versions of the SSU and latest cumulative update (LCU) without any extra steps.

To avoid this issue, be sure to first slipstream the SSU released March 29, 2021 or later into the custom offline media or ISO image before slipstreaming the LCU. To do this with the combined SSU and LCU packages now used for Windows 10, version 20H2 and Windows 10, version 2004, you will need to extract the SSU from the combined package. Use the following steps to extract the SSU:

  1. Extract the cab from the msu via this command line (using the package for KB5000842 as an example): expand Windows10.0-KB5000842-x64.msu /f:Windows10.0-KB5000842-x64.cab <destination path>

  2. Extract the SSU from the previously extracted cab via this command line: expand Windows10.0-KB5000842-x64.cab /f:* <destination path>

  3. You will then have the SSU cab, in this example named SSU-19041.903-x64.cab. Slipstream this file into your offline image first, then the LCU.

If you have already encountered this issue by installing the OS using affected custom media, you can mitigate it by directly installing the new Microsoft Edge. If you need to broadly deploy the new Microsoft Edge for business, see Download and deploy Microsoft Edge for business.

After installing this update, Microsoft OneDrive might unexpectedly close, and you might receive an error when attempting to do the following:

  • Sign out or unlink your account in the Microsoft OneDrive sync app.

  • Unlink sites or folders from syncing to your device from Microsoft SharePoint or Microsoft Teams sites.

  • Uninstalling the OneDrive sync app might fail.

Note These issues might affect both OneDrive and OneDrive for Business.

We are working on a resolution and estimate a solution will be available in the coming week.

After you install this or later updates, you might be unable to reconnect to Direct Access after temporarily losing network connectivity or transitioning between Wi-Fi networks or access points.

Note This issue should not affect other remote access solutions such as VPN (sometimes called Remote Access Server or RAS) and Always On VPN (AOVPN).

Windows devices used at home by consumers or devices in organizations which are not using Direct Access to remotely access the organization's network resources are not affected.

 This issue is addressed in updates released December 13, 2022 (KB5021233) and later. We recommend you install the latest security update for your device. It contains important improvements and issue resolutions, including this one. If you install an update released December 13, 2022 (KB5021233) or later, you do not need to use a Known Issue Rollback (KIR) or a special Group Policy to address this issue. If you are using an update released before December 13, 2022, and have this issue, you can address it by installing and configuring the special Group Policy listed below. The special Group Policy can be found in Computer Configuration -> Administrative Templates -> <Group Policy name listed below>.

For information on deploying and configuring these special Group Policy, please see How to use Group Policy to deploy a Known Issue Rollback.

Group Policy downloads with Group Policy name:

Important You must install and configure the Group Policy for your version of Windows to resolve this issue.

How to get this update

Before installing this update

Microsoft now combines the latest servicing stack update (SSU) for your operating system with the latest cumulative update (LCU). For general information about SSUs, see Servicing stack updates and Servicing Stack Updates (SSU): Frequently Asked Questions.

Prerequisite:

Based on your installation scenario, choose one of the following:

  1. For offline OS image servicing:

    If your image does not have the March 22, 2022 (KB5011543) or later LCU, you must install the special standalone May 10, 2022 SSU (KB5014032) before installing this update.

  2. For Windows Server Update Services (WSUS) deployment or when installing the standalone package from Microsoft Update Catalog: 

    If your devices do not have the May 11, 2021 (KB5003173) or later LCU, you must install the special standalone August 10, 2021 SSU (KB5005260) before installing this update.

Install this update

Release Channel

Available

Next Step

Windows Update or Microsoft Update

Yes

Go to Settings > Update & Security > Windows Update. In the Optional updates available area, you’ll find the link to download and install the update.

Windows Update for Business

No

None. These changes will be included in the next security update to this channel.

Microsoft Update Catalog

Yes

To get the standalone package for this update, go to the Microsoft Update Catalog website.

Windows Server Update Services (WSUS)

No

You can import this update into WSUS manually. See the Microsoft Update Catalog for instructions.

If you want to remove the LCU

To remove the LCU after installing the combined SSU and LCU package, use the DISM/Remove-Package command line option with the LCU package name as the argument. You can find the package name by using this command: DISM /online /get-packages.

Running Windows Update Standalone Installer (wusa.exe) with the /uninstall switch on the combined package will not work because the combined package contains the SSU. You cannot remove the SSU from the system after installation.

File information

For a list of the files that are provided in this update, download the file information for cumulative update 5018482.  

For a list of the files that are provided in the servicing stack update, download the file information for the SSU - version 19042.2180, 19043.2180, and 19044.2180. 

Facebook LinkedIn Email
SUBSCRIBE RSS FEEDS

Need more help?

Want more options?

Discover Community

Explore subscription benefits, browse training courses, learn how to secure your device, and more.

Microsoft 365 subscription benefits

Microsoft 365 training

Microsoft security

Accessibility center

Communities help you ask and answer questions, give feedback, and hear from experts with rich knowledge.

Ask the Microsoft Community

Microsoft Tech Community

Windows Insiders

Microsoft 365 Insiders